Pool remodeling and resurfacing in Dallas, TX
Remodeling covers anything from a new interior finish to a full makeover: new tile and coping, updated equipment, an added tanning ledge or spa, or a reshaped pool.
Pool Builders Dallas Texas is a referral service: an independent local builder does the quote and the work.
Get a quote
Tell us about the project. A local, independent pool builder serving your area follows up.
When it makes sense
Signs this is your project.
- The plaster feels rough, is etched or stained, or is wearing through in spots.
- Waterline tile is loose or missing, or the coping is cracked or separating from the deck.
- The pump, filter or heater is old and inefficient, or you want automation, LED lighting or a variable-speed pump.
- You want to change how the pool is used: add a ledge, steps, a spa or new decking.
What the work involves
How the project runs.
Inspection
The builder checks the shell, tile, coping, deck, plumbing and equipment, and tells you what is cosmetic and what is structural.
Scope and permit
Resurfacing alone often needs no permit; structural changes, new electrical or added features usually do. The builder should confirm with your city.
Drain and prep
The pool is drained carefully (Texas clay and high groundwater can affect an empty shell), then the old surface is chipped or prepared.
Tile, coping and repairs
Cracks are repaired, new tile and coping go on, and any added features are built.
New finish and startup
Plaster, quartz or pebble finish is applied, the pool is refilled, and the water is brought up slowly to protect the new surface.
Cost
What it costs.
| Scope | Published planning range |
|---|---|
| Resurfacing alone (Texas) | $6,000 to $15,000 (a Texas builder’s 2026 cost guide) |
| Tile, coping, equipment and feature changes | Quoted per project; ask for each item to be priced separately |
Planning figures from the linked 2026 source, not quotes. Pool size, finish type (plaster, quartz or pebble), repair work and anything structural move the price most.
The Dallas angle
What’s different here.
Around Dallas, older pools in neighborhoods built out in the 1970s through the 1990s are often due for a full refresh at once: finish, tile, coping and equipment. Clay movement over the years is a common reason coping and deck joints fail. A good remodel quote separates cosmetic work from repairs to the shell or deck, so you can see what is really needed.
FAQ
Pool Remodeling & Resurfacing questions.
How do I know it needs resurfacing and not just cleaning?
If the surface feels rough on your feet, shows etching, or has stains that don’t come out with brushing and balanced water, the finish is usually worn. A builder can tell you on a site visit.
Plaster, quartz or pebble?
Plaster is the lowest cost and shortest-lived. Quartz adds durability. Pebble finishes cost the most and usually last longest. Ask each builder for the warranty on the finish they quote.
Can I add a spa or ledge to an existing pool?
Often, yes, depending on the shell and the equipment. It usually needs a permit and is priced as a remodel rather than a resurface.
How long is the pool out of use?
A straight resurface is typically a short project measured in days to a couple of weeks once it starts. Remodels with tile, coping or structural work take longer. Get the timeline in writing.